ghip systems GmbH
     ghip systems GmbH
English Deutsch
  English   Deutsch
Home News Products Contact



Product Overview

Active Products TDM Multiplexers IP Multiplexers Gigabit Switch Fiber Converter 2.7G Fiber Converter 10G Fiber Backup

Passive Products DWDM Multiplexers CWDM Multiplexers CWDM Add/Drop WDM Multiplexers

Optical Modules GBIC Modules SFP Modules SFP+ Modules XFP Modules X2/XENPAK Modules

Accessories FO Patch Cables FO Attenuators

Measurement Light Source Fiber Meter CWDM Power Meter






modular CONV 7004

Flexible 3R Fiber Converter/Repeater

modular CONV The modular CONV 7004 is a flexible fiber optic converter and repeater with integrated management. It has four independent channels that allow a data rate of up to 2.7 Gbit/s. Full 3R Regeneration (re-amplification, re-shaping, re-timing) on each channel is included.

The chance to complete any port of each channel with individually selectable fiber optic SFP modules makes it suitable for use in a wide range of applications.

The integrated management facilitates fine-tuning of its features, performing loops and BERT tests, as well as monitoring of the line quality via SNMP or Telnet, based on the SFP's Digital Diagnostic functions.
Two Ethernet and one Fiber management ports allow cascading of two or more converter units for management purposes.

Due to the power supply and fan redundancy, this device is also well-prepared for use in environments with demand for high reliability.

See also:
- The copper/fiber media converter option of the switch GIGA 6208+8.
- Fiber backup switching including 3R Regeneration with the modular BKUP 7502.
- Accessories: An assortment of SFP modules and patch cables for the converter ports.

  • Managed 3R Fiber Optic Converter/Repeater with four independent converter channels, each one provided as a SFP slot pair
  • Channel data rate up to 2.7 Gbit/s
  • Fully flexible "any-to-any" color/fiber/budget choice for each port on each channel because of standard SFP use
  • Selection of multi-mode, single-mode, WDM, CWDM or DWDM for each port individually
  • Fully protocol transparent
  • Integrated Management via VT100-CLI, SNMP and Telnet
  • Support of test loops and performing BERT tests
  • Digital Diagnostic Monitoring (DDM) of the SFP modules
  • 2 Copper RJ45 and one fiber SFP port for Ethernet SNMP/Telnet management allow cascading
  • Redundant Power Supply 100-240V AC or -48V DC
Application Examples
  • "Any-to-any" Fiber Optic Converter
  • Fiber Optic 3R Repeater for Long-Distance Transmission
  • Color Generator for passive CWDM/DWDM Systems

modular CONV converting four Independent Protocols each with 1310 nm to CWDM Color Scheme


modular CONV working as a 4 x Fiber Optic 3R Signal Regenerator

Number of Channels 4 independent Converter/Repeater Channels
Fiber Optic Interfaces 2 SFP Module Slots per Channel:
In and Out
Signal Regeneration 3R (Re-shaping, re-timing, re-amplification)
Data Rate 9 fixed 3R Data Rates 100Mbit/s up to 2,7 Gbit/s:
- FDDI, 100 Mbit Ethernet
- STM-1, STS-3
- STM-4, STS-12
- Fibre Channel
- Gigabit Ethernet
- 2G Fibre Channel
- STM-16, STS-48
- STM-16, STS-48+FEC
plus Transparent Mode (without 3R)
Management VT100 Console
SNMP Configuration and Monitoring
Telnet integrated
Power and Status LEDs
Software Update via TFTP
Management Interfaces:
2 x 10/100BaseT RJ45,
1 x 100BaseFX SFP Slot,
1 x VT100 Sub-D9
Power Supply Two Redundant Plugs with 2 x 100 - 240V AC or 2 x -48V DC
Fans Redundant Fan
Mechanical 19" 1HU, Depth 260 mm
Environmental Temperature 0-40oC, Humidity max. 90%, Non-condensing
Ordering Information

modular CONV 7004
3R Fiber Optic Converter/Repeater
with 4 independent Channels, each
with Dual Fiber (SFP Slot)
redundant Power Supply and Fan

2 x 100-240V, european plug
Order Code: G7004-EU

2 x 100-240V, US plug
Order Code: G7004-US

2 x -48V DC
Order Code: G7004-48


DatasheetDatasheet for the
modular CONV 7004

ApplicationApplication 2 Examples


© ghip systems GmbH 2001 - 2012